Cutback Bitumen MC-250
Cutback bitumen MC 250 producing way would be same as other MC bitumen and it will make from high quality Bitumen dissolved in kerosene solvents in Asia Bitumen solvent towers. the solvent of MC 250 would be kerosene and for better quality of final product the quality and solvent both of them must be with high quality and without any impurity.
Cutback Bitumen MC-250 uses
MC 250 or medium cure cutback bitumen is using for reducing or diluent the viscosity of Bitumen in road constructions normally is spraying cutback asphalt MC 250 on surface of road Asphalt and its very good for first coating because it do not need to make it heat.
Cutback asphalt MC 250 is using for waterproofing surface cracks like cracks on the Asphalt in roads and in roof of constructions it can use for waterproofing the surfaces of non Asphalt constructions.
the main uses of cutback asphalt MC 250 is using in surface of places for increasing adhesion of surfaces before asphalting them or waterproofing these surfaces by Asphalt.
Cutback Bitumen MC-250 Packing
Packing of Cutback Asphalt would be normally bulk in tankers or with new steel or recondition thick drum with pallet.
Cutback Bitumen MC-250 Maintenance conditions
Cutback Asphalt MC 250 must handle and storing in low temperature conditions because its vapor would be flammable.
Cutback Bitumen MC-250 specification
|Test on Residue from distillation test||Test Method||Specifications|
|Penetration 77°F (25°C) 100g,5s mm||ASTM D5||120 – 300|
|Flash point(tag open cup), °C||ASTM D3143||66 min|
|Ductility 77°F (25°C) 5cm/min cm||ASTM D113||100|
|Solubility in trichloroethylene||ASTM D2042||99|
|Water, percent volume||ASTM D95||0.2 MAX|
|Viscosity at 140°F (60°C)||ASTM D2170||30 – 120|
|Kinematic viscosity at 60°c ,cST||ASTM D2170||250 – 500|
to 437°F (225°C)